Spindle
●
POWER
LOAD
0 W
0.0 %
0
RPM
Feed
●
POWER
CHIP LOAD
0 W
0.0000 in
0
in/min
DRO
X0.0000in
Y0.0000in
Z0.0000in
A0.000deg
B0.000deg
Control
Optional Stop
Machine
Active machine
V2-50 loaded (boardRevision v2revR). Change via the dropdown in the top-right.
Connect to your Pentamachine
USB cable plugged in? The BeagleBone Black inside your machine exposes itself as a USB-Ethernet gadget on
192.168.7.2
(Linux/Windows) or
192.168.6.2
(macOS). Pentacad talks to Rockhopper at ws://<ip>:8000/websocket/.
Not connected.
Machine 3D model
Every Pentamachine ships with a detailed GLB model of itself at
/opt/penta-ui-builds/gltf/<variant>.glb.
When connected over USB, Pentacad can fetch the exact model for your machine.
Design
Import workpiece
Stock
Setup 1
Stock100 × 100 × 10 mm
MaterialAluminum
WCSG54 · centre-top
PlaneXY (A=0, B=0)
Operations
1
Face
T1 · Ø6.35mm flat · 18000 rpm
2
Adaptive Clear
T2 · Ø3.175mm flat · 22000 rpm
3
Pocket
T2 · Ø3.175mm flat · 22000 rpm
4
Drill (4× corner holes)
T3 · Ø3mm drill · 3500 rpm
Posted
Lines—
Move count—
Cut distance—
Est. time—
Send program to sim
The simulator runs in-app. Use the iframe's own playback bar (centered, bottom of the viewport). Or post G-code from the CAM tab and it'll auto-load here.
Motion summary
Total distance—
Rapid moves—
Cut moves—
5-axis moves—
Est. run time—
Soft-limit check
XOK
YOK
ZOK
AOK
BOK · continuous
Current move
LineN—
Mode—
Feed—
Note—